Eastwood Powder Coat Gray Primer - EW10301LB
Epoxy Based Primers for Powder Coating and the Best Adhesion
Enhance durability of powder-coated finishes with this epoxy-based primer. The exceptional durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under our translucent finishes.)
For best results apply to clean bare metal and place in a preheated 204 degree D oven until flow out occurs, remove from oven and allow to cool. Apply top coat according to the cure time for the powder selected.
Gloss Level: Flat 3±2
Cure Temperature: 204 degree C
Cure Time: Apply to clean bare metal and place in a preheated204 degree C oven until flow out occurs, remove from oven and allow to cool. Apply top coat according to the cure time for the powder selected.
Powder Type: Epoxy
Coverage: 1/lb/454 grams of powder is approximately 4 square metres.
Allowing the Epoxy powder primer to fully cure will cause poor adhesion of the top coat. Some degree of adhesion can be restored to fully cured epoxy primer by sanding with 220 grit paper, however adhesion is always best when the top coat is applied over the partially cured primer surface.