Eastwood Powder Coat Ford Dark Blue

Replicate that Dark Blue found on many Ford vehicles.

Eastwood Powder Coat Ford Dark Blue - EW10106lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Powder Coating 101

Powder coating is becoming increasingly popular as a nearly indestructible alternative to regular paint. In this video we go over everything that a beginner needs to know when they start powder coating! From safety supplies to getting you the right powder coating system we make starting this process easy.

HD version of this video can be downloaded here


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Ford Dark Blue
Gloss Level: Gloss
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Silver Argent Rally Wheel Paint from Eastwood

This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.

Wet powder coating method for cast bullets

This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.

  • Great for shake and bake cast bullets
    I used this powder for powder coating bullets. It is probably one of the best I have used. Nice, even thick coverage with good adhering with this method. great color.
  • Perfect For Powder Coating Bullets
    I bought the Ford Dark Blue on recommendations from a YouTube video. My first try looked great and had a nice coating. Using a tumbler or vibrating device works the best. I know this is not new to the YouTube population, but it is to me due to a friends medical issue with lead. The coating seals the bullets well and is easy and cheap to do. One pound will cover about 4-5,000 bullets. Thanks..
  • Great for lead bullets
    Great even coverage if used for lead bullets. Excellent starter color even if you're a chevy guy.
  • Fantastic
    I am a Mopar guy, but I am helping a friend with his 67 Mustang. All I use is Eastwood powder. The valve covers front cover, oil pan etc. came out AWESOME. THIS IS IMPORTANT! SO LISTEN UP! The Eastwood Ford Dark Blue High Ceramic Engine Paint is almost a perfect match for this powder. It is off a teeeeeeny bit, but no more than the difference between two cans of rattle paint that came from different batches. I'll post a picture of the engine when we get it completely together. PS, the ceramic engine paint is awesome too.
  • too cool
    This has been a great shade for a 1960 Falcon project I am working on
  • Great color
    I got this color in a sampler kit and used it on some suspention parts. It is a great dark blue that stands out well against lighter colors

Write a Review

Product Feedback

1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *