Eastwood Powder Coat Flat Black

This smooth, custom flat black finish provides a durable, great looking finish.

Eastwood Powder Coat Flat Black - EW11869lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Powder Coating 101

Powder coating is becoming increasingly popular as a nearly indestructible alternative to regular paint. In this video we go over everything that a beginner needs to know when they start powder coating! From safety supplies to getting you the right powder coating system we make starting this process easy.

HD version of this video can be downloaded here

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Black
Gloss Level: Flat
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Epoxy
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Silver Argent Rally Wheel Paint from Eastwood

This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.

Wet powder coating method for cast bullets

This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.


  • Good Powder
    I had a lot of trouble shooting this flat black until I tried turning the psi down very low. For me this worked extremely well and once I switched my approach up everything came out perfectly. Great price, just a little fickle compared to other colors from Eastwood in my experience.
  • Flat black
    one of my most popular colors next to gloss black never had a issue with it. Always comes out perfect and is very forgiving when coating where if you get to much or if the part is not perfectly clean it still comes out perfect
  • Great color
    use this color alot , layer nice covers nice . A staple for the powdercoater
  • I like it!
    Perfect low sheen "hot rod" bllack

Write a Review

Product Feedback

1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *