Eastwood Powder Coat Semi-Gloss Black

A deep semi-gloss black finish for when satin and gloss will not do.

Eastwood Powder Coat Semi-Gloss Black - EW10108lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Powder Coating 101

Powder coating is becoming increasingly popular as a nearly indestructible alternative to regular paint. In this video we go over everything that a beginner needs to know when they start powder coating! From safety supplies to getting you the right powder coating system we make starting this process easy.

HD version of this video can be downloaded here


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Semi-Gloss Black
Gloss Level: Semi-Gloss 50-60%
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Silver Argent Rally Wheel Paint from Eastwood

This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.

Wet powder coating method for cast bullets

This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.

  • Nice factory OEM black
    This was my first time powder coating anything, I think it came out pretty nice. I did all of the levers, shifters, brackets, and calipers on my 250r 3 wheeler in this black and it has a nice factory finish to it
  • Best of the Best
    Started using this on auto brackets, and rear Diff. covers. It looks Perfect for semi Gloss for factory components. I will need an Eastwood "Chefs hat" next!!
  • Great Powder
    I have powder coated nearly all my suspension parts in Semi Gloss Black and they look just great. I have purchased a few pounds of this powder and will continue to buy. Makes 50 year old parts look like new!
  • Absolutely Excellent
    All I use is Eastwood powders. You might be able to fins others for a little less, but you get what you pay for. The sheen on this powder is perfect for all kinds of brackets and suspension parts.
  • Eastwood Hotcoat Delivers!
    As promised, and not unexpectedly, Hotcoat Powder Semi-Gloss Black applies easily, covers completely, and flows out evenly, resulting in a durable, professional-looking finsh - even when applied by a novice like me!
  • Super Product
    This is the first time I tried powder coating parts 69 GTO. The outcome has the look of a factory finish and the clean-up was a breeze. I will be trying other powder products.
  • Nice product.
    It leaves a nice coating and is not as shiney as I thought it might be. Looks more like a factory finish, which is what I am wanting for my 73 nova. I am happy with how it turned out.
  • Like the product
    I had been purchasing this powder. Happy with the results. Not so happy with availability of the product. Seems the last couple of times I have been on the Eastwood site it has been on back order.

Write a Review

Product Feedback

1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *