Fillers (Bogs) - Wurth Spray Seam Sealer - Ivory

The Rust Restoration Specialists !

Wurth Spray Seam Sealer - Ivory

Spray sealer based on MS polymers to restore the original structure and texture when undertaking an accident repair.

Product Code: WSSI

Quantity
ppcco tabs

Wurth Spray Seam Sealer - Ivory - 310ml

Wurth Urethane Based Sprayable Seam Sealer is a seam sealer based on MS polymers to restore the original structure and texture when undertaking an accident or restoration.

This Wurth Seam Sealer is used when sealing joints or when replacing components in the engine compartment, boot, floor pan, suspension, etc.

Features
▶   Paintable within 1 hour
▶   Isocyanate and silicone free
▶   Good adhesion properties on galvanized, self color & originally primed parts
▶   Quick drying (approx 3mm/24h at 68?F and 50% RH)
▶   Wet on wet paintability once product has skinned over
▶   Can be painted with all standard commercial paints (except alkyd resin paints)
▶   Once opened the cartridge remains usable for several weeks

Broad range of applications
Adheres to a large range of surfaces, even without a primer coat.

High Shore A hardness
The material is insensitive to mechanical loads.

High tensile strength and elongation at break
Seam also withstands strong movements/stretching.

UV-stable
Excellent ageing behaviour, even when seams are not painted.

Can be painted "wet on wet"

Isocyanate and silicone-free


Do not allow Spray Seam Sealer to come into contact with fresh PU materials (i.e. those that have not yet hardened). When painting over with metallic paints, a blocking primer should definitely be applied. Optimum adhesion between the paint and the Dichtfix is achieved when the material is painted immediately following application

Instructions
The surfaces must be clean, dry and free from dust and grease.
Spray Sealer is applied using the Kombifix pneumatic gun, art. no. 0891 628 6. The required textures and coat thicknesses are determined by the distance to the object or through the air pressure.


The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products. - Wurth

PRODUCT INFORMATION
msds Wurth Spray Seam Sealer - Ivory Product Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds Wurth Spray Seam Sealer - Ivory Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

Watch Wurth Sprayable Seam Sealer & Gun Video

Wurth Sprayable Seam Sealer & Gun

Wurth Sprayable Seam Sealer & Gun

Wurth Sprayable Seam Sealer Gun...virtually undetectable! Application Process

1. Cut the foil seal at the bottom of the cartridge and remove the stay fresh moisture pellet.
2. Cut the tip, but leave the threads in tact.
3. Place the filter screen in the gun
4. Thread the cartridge clockwise into the gun and gently tighten
5. Thread the housing over the installed product
6. Apply nozzle of choice
7. The regulator must be attached to the gun when using the gun as a seam sealer