Preparation - Wurth Rost Off Ice rust remover
Wurth Rost-Off Ice rust remover
This product represents the latest breakthrough in penetrating lubricant technology. By combining rapid freezing action with an advanced, rust eating formula, seized or rusted parts are easily released. Shrinkage of sprayed parts quickly breaks open micro fine fissures allowing the lubricant to easily penetrate through the toughest rust. The innovative rust eating technology then dissolves rust making the job a snap and future maintenance easier as well.
High-grade rust loosener with cracking effect created by extreme cooling, and excellent creeping properties.
▶ When the surface of the material, e.g. that of a threaded bolt, is cooled down to -40oC, microscopic cracks appear in the layer of corrosion of the joints, and these cracks break up the rust and therefore ensure better penetration by the active substance.
Phenomenal capillary action.
▶ Superior creeping properties combined with the cracking effect ensure excellent penetration of rust.
Ideal rust removing capability.
▶ Penetrates rapidly underneath rust and loosens bolts that have seized up.
▶ Badly rusted-up screw connections can be easily loosened without damaging the bolts.
Corrosion protection additives.
▶ Long-term protection against subsequent corrosion.
Free from resins and acids.
No damage to rubber and seals.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Remove as much coarse soiling as possible
Shake can before use
Spray seized parts (bolts) from the shortest possible distance and allow to work for approx. 1-2 mins.
Repeat the process for stubborn connections
|MATERIAL SAFETY DATA SHEET|
|Wurth Rost Off Ice Material Safety Data Sheet|
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.