DIY Kits - Bill Hirsch Motorcycle Gas Tank Repair Kit
Bill Hirsch Motorcycle Gas Tank Repair Kit
Don't spend hundreds on a new gas tank! Motorcycle gas tank repair kit stops rust and seals leaks permanently! For motorcycles and other small metal fuel tanks such as recreation vehicles, snowmobiles, outboards, generators, etc. Resists all fuels, including alcohol and ethanol. Bonds to metal and fiberglass (not recommended for use with 2-cycle fiberglass tanks with fuel and oil stored together). Seals up to 12-15 gallon tank!
Kit includes: 16-oz Gas Tank Cleaner, 16-oz Gas Tank Etch, 16-oz Gas Tank Sealer, and Miracle Epoxy Putty for small holes. Detailed instructions are included to ensure a permanent repair of your tank. Made in USA.
STEP 1 - Gas Tank Cleaner - The best and safest cleaner of its kind on the market. Cleans out gummy fuel tanks. Works on all metals and fiberglass. Highly concentrated, non-toxic, non-flammable, biodegradeable. Rinses off completely with water.
STEP 2 - Gas Tank Etch - Removes light buildup of rust and etches the inside of the tank leaving a gray phosphate coating for the Gas Tank Sealer to adhere to.
STEP 3 - Gas Tank Sealer - Stops rust and leaks. Resistant to all fuels including alcohol and ethanol. Heavily compounded with rust inhibitors to prevent future rusting. Permanently bonds to metal or fiberglass tanks. This is the only sealer on the market approved for use in aircraft. Easy to use - pour sealer in tank, slosh around to cover all surfaces, and pour excess out.
Miracle Epoxy Putty - Perfect for sealing holes in a gas tank where a larger than pinhole hole exists. Dries rock hard and can be sanded.
CAUTION - Respiratory Protection is required when painting. Not included.
CAUTION - Once dry, Bill Hirsch Paints cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.
Remove Gum & Varnish
Remove Rust & Etch
Pour in Sealer