Eastwood Matte Black Engine Paint + Activator

Ceramic nano-technology engine enamel withstands 650 degrees F.

Product Code: EW13786ZP

Size: 946ml

Excludes Courier Fee

Eastwood Ceramic Engine Paint Matte Black 946ml - EW13786ZP

Eastwood sets the standard in high temp engine paints!

▶   Super durable, utilizing ceramic nanotechnology
▶   Protects engine and resists chips, chemicals and heat
▶   Withstands temperatures up to 650℉
▶   Provides a beautiful factory-look finish
▶   Easy to apply - brush or spray on (for best results metallic's should be sprayed)
▶   One quart covers approx. 40 square feet
▶   For added durability and gloss use Eastwood's activator 21854Z(included)

Each color is replicated after the original color for that deep rich factory look. The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F!

NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Application:

To apply simply clean all surfaces with PRE (EW10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun.
Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP.
No primer is necessary and allow 24 hours to fully cure
NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Safety:

Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.

PRODUCT INFORMATION
msds Click for Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds Ceramic Engine Paint Matte Black - Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

Matte Black High Heat Engine Paint from Eastwood

Eastwood Matte Black Engine Paint uses ceramic nano-technology to resist chips, chemicals and temperatures up to 650 degrees fahrenheit. Great for Rat Rods! See oil leaks much easier than gloss black.

  • Amazing Paint
    I've used 3 quarts of this stuff for 3 different builds and all I have to say is that it is amazing stuff. I spray it with a hvlp gun with a 1.2 tip and it lays down smooth. Once it's fully cured it is rock hard and withstands any temperature that I have thrown at it. Just make sure you use the activator and mix it 4:1. No need to reduce it when spraying..

Write a Review


1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *