Eastwood Hotcoat Powder Single Stage Reflective Chrome

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Single Stage Reflective Chrome - EW11504LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Finished gloss is between traditional Reflective Chrome Powder and Reflective Chrome with clear coat. For best results with translucent's, we recommend using our traditional Reflective Chrome Powder.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Chrome
Gloss Level: High Gloss
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyurethane
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical

  • WOW!
    I used this powder on a suspension spring and I'm blown away by the result! From a few feet away it's almost impossible to distinguish from a real chrome plated spring. Up close the appearance looks like chrome that simply needs a wipe. I also coated a valve cover with less spectacular results.in order for this powder to look good the object you're coating has to be PERFECTLY smooth. The valve cover has some rust pitting and it really shows. This is a GREAT product!
  • I like it!
    Did my oil pan with it and it came out perfect. Also a perfect match for the Aluminum engine enamel I also got from Eastwood.
  • Worth a look
    Not a bad item; if you're expecting 'chrome', you'll be disappointed, as the finished part looks like polished aluminum with a slightly milky clearcoat over it. This will show any flaws in the part, so prep is important. The only real issue I had was on cast/forged iron/steel parts, as the color came out darker and I had 'mottling' on a few parts. Looks very good on steel sheetmetal. Lots cheaper than plating, so it's worth a look.
  • Great product
    Great looking product.It is very simple to apply ,and good coverage. I am going to do alot of engine parts with this, Thanks
  • Great Stuff
    I'm not sure what reflective chrome is supposed to look like but I continue to be impressed with it. I've used it for numerous parts on motorcyles and decided to try doing a frame in it. It turned out great and is almost to shiny for by liking, but will be fine when all the parts are reinstalled.
  • Wasn't too sure at first
    I wasn't sure about this powder at first because of a few bad reviews, but once I got the first item coated and cured I was sold!! Not only did I coat the second part of a pair, but the wife now has me doing other parts on the rebuilt engine for her rebuilt MGB
  • Not quite what I expected but still a nice finish.
    was hoping for a more reflective finish but turned out more of a gloss silver or polished aluminum look. At a distance it could pass as chrome but up close it looks more like polished aluminum, without all the work. Eastwood's tech support recommended using V-Twin black as a base coat and then doing the chrome as a top coat, that is the way to go. I've tried the V-Twin base and just using the chrome only, V-Twin and chrome top coat is the way to go.
  • smooth
    works very well flows out great, pre-heat parts to 200f,,,,,, nice shine
  • looks nice poor exterior
    this goes on nice and looks awesome when cured, but fades in sunlight after a short period time(6months). Works great for interior parts