Eastwood Hotcoat Powder Extreme Chrome Bonded

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Extreme Chrome Bonded - EW15999LB

Eastwood Extreme Chrome Bonded Powder - This "Chrome" powder is the closest to the look of real chrome of any we have ever offered!

▶   High-Tech, Bonded Polyester-TGIC formulation for tarnish resistance
▶   Cures at 400℉
▶   Our most reflective "chrome" powder ever
▶   Topcoat with Eastwood # 10286 Super Gloss Clear for best results
▶   A perfect base under our translucent or candy powders for custom finishes

So reflective, you can read printed text in the reflection! Great for motorcycle parts, under hood components and external trim pieces. For best results, topcoat with a clear, translucent or candy powder.


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Chrome
Gloss Level: Gloss
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: High-Tech, Bonded Polyester-TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see


Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes

  • Beautiful finish on aluminum spinner
    I bought this to try on a car that had anodized spinners. I first glass bead blasted the anodized finish off and washed, Next I applied the powder and placed in a convection oven at 400 degrees. I was amazed how the grey dust changed to a beautiful finish. Impressive. I think the finish should stand up to pounding with lead hammer well when tightning the wheel.
  • Fantastic Results
    I posted a video on YouTube of my application using a shaking can (no gun) and bake. Went on fantastic and finished perfectly. AAA+++ from me. Search YouTube under 2003HarleyGuy to find the video.
  • It's work
    Clean, Clean, Clean. I made beautiful parts. I'm very satisfied. The cure is also super important. Regards from Brazil.
  • Fantastic
    Much cheaper than chrome! This finish looks better than the single stage I tried last month. I haven't clear coated it but am attempting some candy over it. Having some issues as soon as applying powder, small spots appear. Hoping to get some suggestions....
  • High gloss finish, but more silver than chrome
    This product is a much better chrome look finish than any other products I have tried. I used it to coat a Model A Ford bumper that was badly pitted and not a candidate for real chrome. The finish turned out high gloss, but more silver than true chrome. The real advantage in this product is you can fill pits and imperfections with a primer coat of powder, or even a product like Metal to Metal filler, then sand down to a smooth finish before applying the chrome powder.