Eastwood Hotcoat Powder Translucent Red

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Translucent Red - EW10092LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Note: split images - right side is over chrome, polished metal, Argent Silver Base Coat, or Reflective Chrome, left side is over bare metal, 10303 Rally Wheel Silver, and 51082 OEM Wheel Sparkle Silver.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques

Specification

Color: Translucent Red
Gloss Level: Gloss
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical

  • best looking red yet
    I shot this color over a bare steel gas tank, fender and oil bag for a custom motorcycle that had swirl marks in a kind of a machine pattern. two coats of the anodized red and it came out looking like kandy apple red!! It flows nice and covers well... but make sure that there is no dirt,lint,fuzz or anything, it will show. scotchbrite between coats helps with the orange peel.
  • Looks Amazing
    Product looks amazing, then when you take it out in the sun, it expodes. Best color i think Eastwood makes
  • Love it
    Man does it look good in direct sunlight
  • I LOVE this powder
    This is a great powder. It only looks really good as a two stage powder. Use chrome powder as a base first. See the before and after photo.
  • awsome color
    It goes on easy and looks perfect has a very good shine. goes good right over chrome or reflective chrome and for a deep candy red over bright red
  • Great color
    Great color - flows evenly. I learned that the lighter coats work best to bring out the translucent properties the best, if you get it too heavy - it's still a very nice dark red but it doesn't appear as transparent. Shot it on a smoked chrome piece as a fade and it turned out excellent.