Eastwood HotCoat Powder - Olive Drab Green

The Rust Restoration Specialists !

Eastwood Hotcoat Powder Olive Drab Green

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Size: 1 lb Bag

Product Code: EW10248LB

Temporarily out of Stock.
email me when back in stock

Request Email when back in stock

Thank You for your interest in this product. It's imported and unfortunately is currently out of stock.
For us to let you know when it is back in stock, please complete the form below.
Please also add me to your mailing list for up-coming PPC Co. special

All the fields are required

Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.

ppcco tabs

Eastwood Hotcoat Powder Olive Drab Green - EW10248LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Olive Drab
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see


Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes

  • Great alternative to Munsell Green
    Good product smooth and provides a great finish without the need for a second application. Works with ease
  • Excellent Army Green
    600 grit sand paper dulls it up, if that's what a person wants
  • Too Shiny for Military Items
    This is a great powder in that it goes on easy, flows out smooth and looks good when cured. I bought it to coat some military items and was disappointed that it's a semi-gloss finish rather than a flat or satin. That's my only complaint. I plan to top coat it with some satin clear to see if I can tone down the shine.