Eastwood Hotcoat Powder Translucent Teal

Extremely durable, chip-resistant finish; coat and cure in under an hour.
Temporarily out of Stock.
email me when back in stock

Request Email when back in stock

Thank You for your interest in this product. It's imported and unfortunately is currently out of stock.
For us to let you know when it is back in stock, please complete the form below.
Please also add me to your mailing list for up-coming PPC Co. special

All the fields are required

Eastwood Hotcoat Powder Translucent Teal - EW16047LB

Create a one-of-a-kind custom candy finish with Eastwood Translucent Teal Powder!

▶   Cure Time: 20 Minutes @ 400℉ (actual surface temperature)
▶   100% Virgin Powder
▶   Gloss Level: High - 80%+ at 60 Degrees
▶   Powder Type: Polyester TGIC
▶   Storage: <80℉, well ventilated, <60% humidity

This durable translucent top coat acts as a colored tint for your base powder or bare substrate. Apply alone as a single stage, over chrome powder to create brilliant teal chrome, or over any other metallic or textured base powder for a dramatic candy finish! When applied over a bright white powder, Translucent Teal will appear as a bright fluorescent teal.

Split image shows left side over white base and right side over chrome base.


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Translucent Teal
Finish: High Gloss
Gloss Level: 80+ at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400℉ (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see


Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes

  • Favorite color
    Put this straight onto steel, looks great, nice gloss.