Eastwood Hotcoat Powder Black Chrome

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Black Chrome - EW21505lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Transparent Black Chrome
Gloss Level: Gloss 80-90
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical

  • Turned out great
    I was hesitant to purchased this powder based on a review I read, but it turned out quite well. I used a bolt jeweling fixture I made from polished stainless steel as a test and turned great.
  • Awesome Results, Very Vesitile.
    This is perhaps my favorite "chrome" powder. Works great as a chrome powder as well as one of the BEST looking translucent powders out there! Far easier to work with than either of the Reflective Chrome powders. Prep is everything here however. Any imperfections in the substrate will show thru. I love using this powder over bare aluminum that I have hand sanded, leaving straight sanding lines in the substrate which is highly visible under the powder after it is cure. So many tricks you can do with the substrate that will show off your artistic side that it isnt funny. I still topcoated with a clear for added durability and greater UV protection, but it isnt required.
  • Really nice!
    As mentioned the substrate must be perfect because it will show as it is a transclucent. But it looks great, sort of a candy grey. I used a brass wire brush on all the billet pulleys on my small Chevy and they came out excellent. I used their wrinkle black on my alt /ps pump brackets for contrast and it turned out wicked!
  • Trick Color
    This color looks really nice over chrome or aluminum, being a newbie I didn't realize that it was a translucent and had to reshoot a few pieces due to the substrate being imperfect. I shot all my billet pulleys and they turned out really nice. Make sure your coating area is clean and air born particals are kept to a min.
  • its awsome
    i have a lil powder coat shop i opened , my biggest seller is the black chrome, all my biker bros love it ! chroming cost too much, and is boring, black chrome looks so much better. i have to order it by the pound from eastwood becouse they have the best prices ive found