Eastwood Hotcoat Powder Satin Black

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Satin Black - EW10103lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Satin Black
Gloss Level: Matte
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see


Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes

  • My favorite powder hands down!
    This is my favorite powder out of ANY powder manufacturer I buy from. I use this for all of my industrial parts powder coating customers. The finish is second to none. It is very very forgiving and is very hard to mess up. It lays down so smooth. I recommend it for chassis's, auto parts or wheels too. I try to up sell it to customers as much as I can.
  • Really easy to apply and very forgivable
    I love this Satin Black. I advertise my painted products as a flat black I feel that is a more accurate than Satin.. I love the finished color as does my customers. Order before you need this as Eastwood is often out of stock.
  • Very smooth and even
    Am very pleased with the end result of this color. Very durable.. survived our hammer test. End result is very smooth and even
  • Great Product!!
    I used this product for the first time today and am in love with it. Very nice finish and easy to spray.
  • Gerat Product
    This is a great product. I have used it for several applications and each one has turned out great.
  • very good
    seems to bond well and is pretty strong real nice sheen but not shiny