Eastwood Hotcoat Powder High-Gloss Black

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder High-Gloss Black - EW10107LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: High Gloss Black
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical

  • great shine
    They said "High Gloss" and they ment it...this is a great powder. flows well and looks great!
  • Great Product
    I am new to powder coating I got this with a starter kit. I have a 2015 Silverado 2500hd Durmax and did not want a stock look as there are 4 trucks in my small town that look like mine so I shot the rear bumper and exhaust tips with this color they look great But what I did find out on the front bumper is that it will show every imperfection but the product is great and I order more to shoot my rims say good-bye chrome will post picture when truck is done
  • Great powder, great value, great shine!
    I love this powder because it is very shiny. Goes down smooth and like other Eastwood powders, it is very forgiving. Just make sure your part is super clean and smooth. On cast items you will see all the ripples of the casting shown in the photo below. There is nothing you really can do except sand it all down to be smooth prior to coating
  • Easy and looks amazing!
    I have never powder coated before getting starter kit which included this color. I am restoring an old jeep and the parts I have powder coated so far look like I payed a professional hundreds of dollars to do. Very easy with awesome outcome!!
  • Great stuff!
    I have just gone through my first bottle of this High Gloss Black powder and am about to order 2 more bottles! One thing that you need to make sure of is to out gas your part before applying the powder. I didn't out gas the first few parts and they developed bubbles in the final cured coat. Now I out gas every thing right after blasting and before coating.
  • Easy and looks amazing!
    I had never powder coated prior to getting the starter kit which included this color. I am restoring a car and the powder coated parts i have done look like I payed someone hundreds of dollars to powder coat. Amazing product!
  • Great product!
    I've used this powder several times and it comes out great! I've been powder coating for about five months and I've gone through about three pounds of powder. It's good stuff!
  • Great Stuff
    This came with my Hotcoat Starter kit and it is a great color. Nice gloss finish and very easy to work with. Another classic from Eastwood!
  • Great Powder
    Used it for the first time on a outer primary and worked great. Will use again.
  • Love this powder
    The best seller for my car and truck guys
  • Just awesome finish and glossy shine
    Have used this on pulleys, brackets, and pipe. Its so easy to use and the finished result makes you want to powdercoat any and everything!!
  • leo
    manifold
    Its a really good product
  • Awesome!
    A great powder with a nice gloss finish. Definitely one of the most used powders in my shop.