Eastwood Hotcoat Powder Mirror Black

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Eastwood Hotcoat Powder Mirror Black - EW10161lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.


Color: Mirror Black
Gloss Level: High Gloss 95%
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see


Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes

  • Excellent Product!!
    I do parts for a custom motorcycle shop. Some of these parts are custom one off parts so quality is of the utmost importance. This is a deep gloss black that goes on well, covers well and cures smooth as glass. I have used other powders and nobody can match any of eastwood's quality powders.
  • Great Product
    This powder comes out of the oven with a wonderful gloss! I had some trouble shooting blacks until I turned the psi down some and I seemed to get much better adhesion and coverage. Great price and wonderful product!
  • Great Stuff!
    Shoots easy, flows smooth, and has great gloss. The plastic tubs are a plus. With Buyers' Club it's a no-brainer.
  • awsome color
    covers nice , great color . I buy all my colors from eastwood , no problems
  • Great stuff
    Tried others no one can match it
  • best black color
    mirror black looks amazing. Flows really smooth and has a great reflection.
  • deep black
    perfect,great, love it! nuf said.......