Eastwood Contour SCT® - Finishing Drum 320 Grit

The Rust Restoration Specialists !

Eastwood Contour SCT® Finishing Drum 320 Grit

Eastwood Contour SCT® Finishing Drum.

Product Code: EW21176


Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.

ppcco tabs

Eastwood Contour SCT® Finishing Drum 320 Grit - EW21176

The Eastwood Contour SCT® Abrasive Drum is to be used for paint or rust removal applications, while metal conditioning at the same time. Each drum is 4 inches wide and 4 inches in diameter.


Always wear all proper personal protecion equipment when using this type of tool. Never attempt to replace a SCT Drum with unit plugged in. Make sure to fully read and understand the instruction manual for this tool before use

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes