Eastwood Diamond Clear Gloss for Painted Surfaces Aerosol Paint 312gm

Eastwood Diamond Clear Gloss for Painted Surfaces Aerosol

Product Code:

EW10196z

Excludes Courier Fee

Qty:

Eastwood Diamond Clear Gloss for Painted Surfaces Aerosol Paint 312gm - EW 10196z

Protect Your Newly Painted Wheels. Delivers added protection against rust, corrosion and chemicals while providing a high-gloss finish that will add a clear-coat depth to your wheels.

This formula resists fading, chipping, and cracking.

Ideal as a clear coat over Rally Wheel Silver paint.

Compatible with most cured lacquer and enamel paints.

One can covers 1/2 square metre /6 sq. ft. (or 2 to 4 wheels).

90+% gloss, Polyurethane, Max temp 300 degrees F.

May slightly dull polished metal surfaces.

Application:

This clear works well over thoroughly cured lacquer, enamel and unusual finishes like our trunk paints.
Dries to the touch in 5-10 minutes at 50% humidity 77 degrees F.
Fully cured in 48 hours at 77 degrees F at 50% humidity. 90+% Gloss.
Can be recoated at any time at 77 degrees or warmer, 50% or less humidity.
Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free.
Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.

Safety:

Always wear eye, skin and respiratory protection use in a well ventilated area consult MSDS for specific warnings and precautions.

Share this product with Friends

PRODUCT INFORMATION

To view and print these files you will need Acrobat Reader

msds

Diamond Clear™ for Painted Surfaces Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.