|
|
|
|
|
Degreasing and Cleaning > Auto-foam |
 |
 |
 |
|
 |
Auto-foam |
|
Auto-foam
Introduction |
There is absolutely no
point in using expensive waxes and sealants striving
to achieve a perfect end finish if you don’t get the
basics right at the outset. Most swirls and paint
imperfections have to be addressed later on in the
process because of poor detailing preparation and
the effects of Foreign Object Damage (FOD) on paint
(such as 'own goal' damage from grit and grime)
having to be removed. However careful we all might
strive to be, sometimes, we make mistakes and damage
happens. So it makes sense to be as methodical and
as careful as we can be, from the very first stages
of the cleaning process, and not just at the end.
Bilt-Hamber’s Auto-foam, the latest addition to our
"detailing" range is the result of extensive
in-house research and development. Auto-foam will
reduce even further the possibility of damage to
paintwork by presenting you with beautifully clear
FOD free paint, ready for subsequent detailing.
Bilt-Hamber Auto-foam is a new generation premium
quality, foaming water-based pre wash treatment,
designed to soak and saturate soiled vehicle
paintwork prior to the application of vehicle
shampoo and paint food. Auto-foam will is gentle too
and is for use with all pressure washer foam lances.
Applied at a typical PIR (Panel Impact Ratio) of 4%.
Auto-foam will panel dwell for typically 5-8
minutes. Auto-foam is formulated specifically to
offer maximum wetting it rinses easily too. |
Auto-foam is made with
biodegradable compounds, is extraordinarily tough on
soil and grime, yet harmless to paint, its
non-caustic formulation ensures that even with
regular use will not attack paint binders. Our hard
working surfactants will attack and penetrate the
hardest of road dirt and grime without the need for
manual intervention. During the panel dwell period,
Auto-foam’s bubbles will systematically burst and
move, encouraging our soaking and cleansing agents
to start working. The effects of road grime are
neutralised by them, by being bonded within our
blend of surfactants, then lifted from painted
surfaces and physically removed, minimising harm
caused by swirling and marking during subsequent
detailing. When its work has been done, Auto-foam
may be washed off in a conventional manner, leaving
a well presented automotive surface, perfectly ready
for further treatments. For excessively soiled
surfaces, simply increase PIR and/or number of
applications.
Auto-foam. 5 litres of high powered Bilt-Hamber
Auto-foam is available for just £14.30 (excluding
post & packing). |
|
|
| |
|
|
|
|
|
|
